CG PressDesign is superior for Layout development,
Auto design, and smart association
On board standard parts for press design, customized data structure
and on demand standardization is available.
[ Process body creation ]
Blank body will be created through development of bending plane and die draw. Radius and
angle of bending part is recognized automatically, and blank body will be created automatically
with K factor from master.
Furthermore various development is available such as unnatural bending, burring, spring back,
bending restore and so on.
In case drawing shape is included in the same body, batch drawing function is available to
develop this part.
So you can amend/edit easily because of feature function of history base. We utilize SolidWorks
interface, so forming parts also will be developed with ordinary function of SolidWorks.
[ Layout Development ]
Process body will be placed into each stage automatically. Blank layout for nesting,
hound's-tooth placement, mirror placement is also available.
In addition, layout development for material width, border amount, sending pitch and number of stage are freely considered.
[ Bending/Forming Punch ]
Bending/forming punch will be created smoothly from cylinder face from bending part and/or forming part.
Created bending/forming punch is associated with product, so the designer can check the gaps between product and bending/forming punch,
it is easy to confirm and will reduce mistakes during the designing process.
[ Piercing Punch ]
Batch creation of piercing punch is available through auto recognition holes in the plate.
Especially, in the case where there are many hole on the plate, batch creation is effective.
And when the designer creates a punch,
the system recognizes the contour of product automatically, so designer does not need to trace contour of product one by one.
Furthermore various modify function such as matching, heal, roof, shank, flange, profile are on board.
[ Setting information of Die structure ]
When the designer considers the die structure, the system provides you die structure information (plate thickness, height), so punch size,
punch place will be up-dated using die structure information.
Because of this, the designer does not need to input punch information each time.
[ Unit ]
Internal standard parts such as springs and suspension bolts, inserts and bolts will be registered as standard unit parts.
Adding coincidence, dimensional binding, relational formula between parts, each part size, each part place will be up-dated automatically.
So design standardization and a reduction in design time will be possible.
[ Customized parts ]
Ordinary internal parts will be registered as customized parts, so you can create your own catalogue.
Registration work is an intuitive and easy operation.
[ Die Set ]
CG PressDesign supports standard die set from FUTABA. It is easy to change plate size,
and easy to insert new plate etc., so customized die set is available.
Frequently used parts such as clamping bolt, knock-out pin, stripper bolt, register to customized die set, so it reduces design time for the die set.
[ Standard Parts ]
There are about 6,200 Standard Parts from FUTABA and MISUMI available for use in CG Press Design. Parameter setting of position
and length are able to set with preview image.
In addition, there is template of machining,
so hole creation will be done easily and smoothly.
[ Parts Release ]
2D part drawing will be created at one time from assembly file and/or part file. Title block,
paper size, multiple parts to one drawing file are available upon releasing from assembly file.
[ Hole Dimension/Hole List ]
Hole dimension / Hole list for machining instruction will be created automatically.
The contents of the machining instruction for the holes will be associated with the part file, so designing time will be reduced significantly.
[ 2D BLANK Option ]
By this function ,Flatten All the the "bending face & forming face" of a product model The Unbending form can be analyzed based on abundant material databases.
The substantial visualization tool supports the compatibility check work of a process powerfully.
[ Partical BLANK Option ] *Indispensable 2D BLANK Option
"Partical BLANK"option can be developed to up to the specified curved surface. Moreover, it was able to be specified, can bend and can develop from a position. With "Angle directions", "Tip form is held.", and abundant parameters, such as "The unbending direction adjustment", As the operator is carrying out, examination is possible in the state near geometric modeling.
Press Analysis Function (Option)
[ Batch Drawing development / Spring Back ]
It enables you to mesh all model surfaces and develop the surfaces. It is also possible to project the edges
and vertices of curved faces before development to developed surfaces and create the developed profile.
At the same time, thickness reduction rate can be drawn, so you can visually confirm the drawing parts.